TM9-2330-371-14&P
RELAY VALVE - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
INSTALLATION - C O N T I N U E D
Relay valve (2),
Line up holes in frame with holes in
Frame(1)
a.
11.
two nuts (3),
relay valve.
lockwashers (4),
Put bolts in place.
b.
and bolts (5)
Put on nuts and lockwashers and tighten
c.
using 9/16-inch wrench and 9/16-inch
socket and handIe.
Rear axle
Relay valve (2)
Put on and tighten using 5/8-inch wrench.
12.
output line (7)
and nipple (6)
Front axle
Relay valve (2)
13.
Put on and tighten using 5/8-inch wrench.
output line (9)
and elbow (8)
Service air
Relay valve (2)
Put on and tighten using 5/8-inch wrench.
14.
Iine(11)
and top elbow (10)
Emergency
Relay valve (2)
Put on and tighten using 5/8-inch wrench.
15.
air line (13)
and elbow (12)
Reservoir air
Relay valve (2)
16.
Put on and tighten using 13/16-inch
line (15)
and elbow (14)
wrench.
NOTE
FOLLOW-ON MAINTENANCE:
1. Test brakes (page 2-18).
2. Check for leaks (page 4-4).
TASK ENDS HERE
TA224286
4-112
