TM 9-2330-371-14&P
H U B AND DUM-CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVALCONTINUED
Hubcap (2) and
Take off.
Hub (1)
2.
It may be necessary to scrape gasket
gasket (3)
off.
Using hub-nut wrench, unscrew and take
Jamnut (5)
Spindle (4)
3.
off.
Key Iockwasher (6)
Slide off.
4.
It may be necessary to pry off with
flat-tip screwdriver.
Bearing adjusting
Using hub-nut wrench, unscrew and take
5.
nut (7)
off.
Hub (1) and drum
Pull out and push back to separate
6.
assembly (8)
bearing.
Bearing (9)
Slide off.
7.
Hub (1) and drum
With help of assistant, slide off.
8.
assembly (8)
10 nuts (11), lock-
Adapter plate (10)
Using 11/16-inch socket, extension and
9.
washers (12) and
handle, unscrew and take off.
and drum
inspection hole
assembly (8)
cover (13)
Drum assembly (8)
Adapter plate (10)
Separate.
10.
it may be necessary to use a hammer
and hub (1)
and wood block to aid in separation.
NOTE
If removing hub and drum only, go to step 20.
10 bolts (14)
a. Using arbor press, push out.
Hub (1) and
11.
b. Separate hub (1) and adapter.
adapter plate (10)
plate (10).
10 bolts (15)
Using arbor press, push out.
Adapter plate (10)
12.
Seal (16)
Hub (1)
a. Using seal puller, take out.
13.
b. Get rid of.
Inner bearing (17)
Take out.
14.
4-114
