TM 9-2330-371-14&P
BOGIE ASSEMBLY - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION CONTINUED
Support with hydraulic jack (2).
Trunnion cross
14.
tube (1)
a. Using 1 7/16-inch socket and
Four nuts (4)
Two U-bolts (3)
15.
handle, unscrew until flush with
ends of U-bolts.
b. Using hammer, drive up.
Take out.
Saddle (5)
16.
Screw in and tighten using 5/8-inch
Swivel
T-fitting (6)
17.
wrench and 1/2-inch wrench.
connector (8)
and hose (7)
Repeat for other axle.
NOTE
FOLLOW-ON MAINTENANCE:
TASK ENDS HERE
TA224319
5-10