TM 9-2330-371-14&P
TRUNNION CROSS TUBE
This task covers:
INITIAL SETUP
Tools
Personnel Required
Hammer, hand
Two
Socket, 1 1/8-inch, 3/4-inch drive
Equipment Condition
Wrench, 1 1/8-inch, open-end
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Two trunnion
Two nuts (3),
Using 1 1/8-inch socket, handle, and
cross tube
washers (4),
1 1/8-inch wrench, unscrew and take out.
brackets (1) and
and bolts (5)
cross tube (2)
2.
Cross tube (2)
Two trunnion cross
With aid of assistant, take off.
tube brackets (1)
Tap with hammer, if necessary.
TA224320