TM9-2330-371-14&P
SPRING SEAT - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION CONTINUED
Place into bearing cup (1) with small
Inner
Bearing cup (1)
14.
tapered end first.
bearing (2)
Position into seal bore (5), making
a.
Rear oil
Spring seat
15.
sure it is alined all around.
seal (4)
assembly (3)
b.
Tap into seal seat, using a seal driver
tool and hammer.
a. Put on.
Washer (7), two dust
Trunniom tube
16.
b. Using seal driver tool and hammer,
seals (8), and wiper
shaft (6)
tap wiper ring (9) onto seat.
ring (9)
TA224335
5-34
