TM 9-2330-371-14&P
SPRING SEAT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
NOTE
Support spring seat (2) on two wood blocks (17)
when removing seal (18) and inner bearing (19).
The wood blocks (17) should be high enough to allow
seal (18) and bearing (19) to drop clear of spring
seat (2).
7.
Spring seat (2)
a. Position with oil seal (18) down. on
two wood blocks (17).
b. Insert brass punch down through
opening in spring seat (2) and against
inner bearing (19).
c. Tap with hammer, around inner bearing
(19), and drive out seal (18).
Inner bearing (19) will drop out with
seal (18). Throw away seal (18).
Tag bearing (19).
TA224333
5-31
