TM 9-2330-371-14&P
SPRING SEAT
This task covers:
a. Removal (page 5-30)
c. Repair (page 5-33)
b. Cleaning and inspection
d. Installation (page 5-33)
INITIAL SETUP
Tools
Materials/Parts Continued
Bar, pry
Solvent, drycleaning, PD-680
Block, wood (two required)
(item 16, appendix E)
Brush
Seals
Grease packer, bearing
Wiper, ring
Hammer
Punch, brass drift
Scale, spring, 0 to 50 pounds
Personnel Required
Universal Puller and Driver Kit
Wrench, 1/2-inch, open-end
Two
Wrench, 1 3/4-inch, open-end
Wrench, wheel bearing nut
Equipment Condition
Materials/Parts
Semitrailer parked on level ground with
front landing gear down, wheels blocked.
Gasket
Wheels/tires removed (page 3-11) (Only
Grease, automotive and artillery,
side that spring seat is to be removed).
GAA (item 8, appendix E)
U-bolts, saddle and spring removed
