TM9-2330-374-14&P
2 4 volt composite light assembly
b.
Disassembly
(1) Unscrew six captive screws (10, figure 4-6) on door (8).
( 2 ) Remove door (8) and gasket (7).
Captive screws (10) are fitted with
retaining rings (11) and will remain in door.
D o not remove gasket (7)
from door (8) unless gasket is damaged.
(3) Remove lamps (4, 5 , a n d 6 ) f r o m s o c k e t s .
(4) Remove C-washers (12) and shells (13) from end of cables.
c.
Cleaning.
See para. 4 - 4 f o r g e n e r a l c l e a n i n g i n s t r u c t i o n s .
d.
Inspection.
See para. 4 - 5 f o r g e n e r a l i n s p e c t i o n i n s t r u c t i o n s .
Repair.
e.
Repair is limited to the replacement of unserviceable parts.
f.
Assembly.
(1) Install shells (13) and C-washers (12) on end of cables.
(2) Install lamps (4, 5, and 6, figure 4-6) in sockets.
(3) Install door (8) and gasket (7) if removed.
(4) Secure door (8) with six captive screws (10).
Installation.
g.
( 1 ) I n s t a l l 2 4 v o l t c o m p o s i t e l i g h t a s s e m b l y ( 4 , f i g u r e 4-5) on bracket (5)
and secure with two lockwashers (3) and screws (2).
(2) Connect cable connectors (1).
4-23
