TM 9-2330-381-14
4-100. OIL FILTER AND DIPSTICK (CONT)
2.
Remove oil dipstick (3) and oil filler plug (4) from engine cover (5). Remove preformed packing (6) from oil filler
plug. Discard preformed packing.
CLEANING
Clean oil filter with clean oil.
INSTALLATION
1.
Install preformed packing (6) on oil filler plug (4). Install oil filler plug and oil dipstick (3) on engine cover (5).
2.
Slide preformed packing (2) onto oil filter (1) and install oil filter.
3.
Fill crankcase with engine oil (approximately 1.37 qt (1.3 l)).
FOLLOW-ON MAINTENANCE
Start APU and check oil pressure indicator (para. 2-16).
4-101. OIL SENDING UNIT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Generals mechanics tool kit, item 16, appx. B
The following tools can be found in common tool kit no. 2, item 18, appx. B:
Rachet, 3/8" dr
Socket, socket wrench, 24 mm, 3/8" dr
Torque wrench, 0-200 in-lb
Socket, socket wrench, 17 mm, 3/8" dr
Materials/Parts
Gasket
Equipment Condition
APU wiring harness disconnected (para. 4-39)
4-486
