TM 9-2330-381-14
NOTE
Grease should be applied to exposed metal surfaces of all hydraulic cylinders, but
only after final deck height adjustment has been made as described in paragraph
f. Apply grease (item 12, appx. E) to all exposed bare metal surfaces on two gooseneck pivot cylinders (1),
gooseneck steering cylinders (2), and platform steering cylinders (3).
g. Apply grease (item 12, appx. E) to all exposed metal surfaces on 10 suspension cylinders (4).
CAUTION
Do not apply tape directly to bare polished metal surfaces. Attempts to remove
any residue left from tape may cause damage to polished surface.
h. For long-term storage, shield exposed bare metal rods with barrier material (item 2, table 4-1) and secure with
tape (item 13, table 4-1). Make sure tape does not contact exposed bare metal surfaces.
4-531