TM 9-2330-381-14
4-114. STARTER (CONT)
REMOVAL
1.
Remove nut (1) and lockwasher (2) and disconnect battery cable (3) and starter (hot) wire (4) from solenoid (5).
Discard lockwasher.
2.
Disconnect starter wire (6) from solenoid (5).
3.
Remove two bolts (7) and remove starter assembly (8).
INSTALLATION
1.
Install starter assembly (8) and secure with two bolts (7).
2.
Reconnect starter wire (6) to solenoid (5).
3.
Connect starter (hot) wire (4) and battery cable (3) to solenoid (5). Install lockwasher (2) and nut (1).
FOLLOW-ON MAINTENANCE
Start and run APU (para. 2-16).
4-528
