TM 9-2330-381-14
5-21.
HYDRAULIC CONTROL MODULE FRAME (CONT)
16.
Using two people, remove six capscrews (1) and bottom cover assembly (3) from hydraulic control module frame
(4).
17.
Remove caps/plugs installed and, using a 1-1/4-inch combination wrench, connect hydraulic tube (38) to tube
elbow (39).
18.
Remove caps/plugs installed and connect hydraulic tube (36) and hydraulic hose (37) to two bulkhead fittings
(35).
19.
Remove caps/plugs installed and connect five hydraulic tubes (34) to bulkhead fittings (35).
20.
Remove caps/plugs installed and, using two people, position two hydraulic tubes (22 and 21) over swivel tube
elbow (29) and tube tee (30) located on streetside of platform. Hold tubes over fittings.
5-100
