TM 9-2330-381-14
5-23.
GOOSENECK CYLINDER
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B.
Lifting strap, item 31, appx. B
Suitable lifting device, 1000 lb (454 kg) minimum capacity or equivalent
Stand, gooseneck support, figure F-9, appx. F
The following tools can be found in field maintenance basic tool kit, item 14, appx. B:
Hydraulic transmission jack
Goggles, industrial
Drain pan, 4 gl
Socket wrench set, 3/4" drive
Crowbar
Torque wrench, 3/4" dr, 0-600 lb-ft
Gloves, chemical and oil protective
Materials/Parts
Cap and plug set, item 5, appx. E
Antiseize compound, item 3, appx. E
Lockwasher
Lockwasher
V-ring seal (4)
Bolt, 2"
Bolt, 4"
Screw, self-locking
Bolt, lubrication, self-locking
Personnel Required: 3
Equipment Condition
Front and rear support legs lowered supporting platform (para. 2-22 and para. 2-23)
If removing curbside gooseneck cylinder, APU control box removed (para. 4-108)
General Safety Instructions
WARNING
Gooseneck cylinder weighs in excess of 400 pounds (182 kg). Be sure cylinder
and gooseneck are adequately supported during removal or injury to personnel
may result.
Hydraulic fluid may be hot if system has been in operation. Allow time for system
to cool before performing maintenance or injury to personnel may result.
Change 3 5-105
