TM 9-2330-384-14&P
4-26. REAR SIDE CLEARANCE AND MARKER LIGHT MAINTENANCE (Con"t).
c. INSTALLATION
WARNING
When performing electrical maintenance, ALWAYS disconnect inter-
vehicular electrical cable from semitrailer. Failure to follow this warning
may create a spark and explosion, resulting in serious injury or death to
personnel.
NOTE
Ensure that all connections are made to clean, uncorroded surfaces. Coat
all wire connections with corrosion preventive compound before they are
made.
(1)
If removed, install new gasket (4). Install rear side clearance and marker light (5) to light box
(3) with four screws (6).
NOTE
On curbside, black wire (10) from rear side clearance and marker light (5)
connects to two brown wires (12). On roadside, black wire connects to
three black wires. Curbside wiring is shown.
(2)
Connect black wire (10) to two brown wires (12) with new connector (13). Crimp connector.
(3)
Install stop/taillight (2) with four screws (1).
FOLLOW-ON TASKS:
Connect intervehicular electrical cable to semitrailer (see paragraph 2-12).
Check operation of light (see TM 9-2320-273-10 or TM 9-2320-283-10).
4-77
