TM 9-2330-384-14&P
4-27. REFLECTOR REPLACEMENT.
a.
Removal
Installation
b.
Materials/Parts:
General Safety Instructions:
One rivet
DO NOT drill out rivet when replacing a
damaged reflector.
Tools:
Tool kit, general mechanic's
Hand riveter
a. REMOVAL
WARNING
DO NOT drill out rivet (2) when replacing a damaged reflector. Drilling can
produce a spark which may cause an explosion and fire. Failure to follow
this warning may result in serious injury or death to personnel.
(1)
Remove damaged reflector (1) pieces away from rivet (2).
(2)
Pull on rivet (2) with pliers to remove. Discard rivet and reflector (1).
b. INSTALLATION
Install reflector (1) with new rivet (2).
4-78
