TM 9-2330-384-14&P
4-26. REAR SIDE CLEARANCE AND MARKER LIGHT MAINTENANCE (Con"t).
(8) Install lamp (8).
(9)
Install rear side clearance and marker light (5) to light box (3) with four screws (6).
(10) Install stop/taillight (2) with four screws (1).
(11) Apply a thin coat of corrosion preventive compound to sealing lip of lens (9). Install lens.
b. REMOVAL
WARNING
When performing electrical maintenance, ALWAYS disconnect inter-
vehicular electrical cable from semitrailer. Failure to follow this warning
may create a spark and explosion, resulting in serious Injury or death to
personnel.
NOTE
Tag wires for installation if other lights at light box (3) are being removed.
(1)
Remove four screws (1) and pull stop/taillight (2) away from light box (3) enough to gain
access to wiring inside light box.
4-75
