TM 9-2350-222-10-2
OPERATE MOLDBOARD (STOW MOLDBOARD IN EMERGENCY) - Continued
30. Remove emergency lift cable (C) from track end connector (J).
31. Feed free end of emergency lift cable (C) thru bracket (H) on
moldboard (D).
32. Pull emergency lift cable thru bracket (H) to clamp (G).
33. Place free end of emergency lift cable (C) under clamp (G) as
shown.
34. Screw eyebolt (F) into moldboard (D) until clamp (G) is snug
against moldboard.
35. Using adjustable wrench (B), tighten nut (E).
36. Repeat steps 28 thru 33 on opposite side.
37. Return adjustable wrench and pinch bar to stowage.
38. Set SELECTOR VALVE lever (M) to NEUT.
39. Lift SUCTION SHUTOFF VALVE lever (V) to CLOSED position.
TA132408
2-268
