TM 9-2350-222-10-2
OPERATE BOOM (PERFORM HOISTING) - Continued
1. Move WINCH CONTROL lever (B) down to pay out enough cable
(C) to reach the ground.
2. Locate snatch block (D) on left front side of turret.
3. Remove spring clip (E). Pull out retaining pin (F) securing snatch
block (D).
4. Remove snatch block (D) from turret.
5. Install retaining pin (F) in snatch block (D). Secure pin with spring
clip (E).
TA132438
2-298
