TM 9-2350-222-10-3
TROUBLESHOOTING
SYMPTOM INDEX (Continued)
Troubleshooting
Procedure
Page
MACHINE GUNS
Caliber .50 machine gun does not fire electrically . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35
Caliber .50 machine gun ready lamp does not light . . . . . . . . . . . . . . . . . . . . . . . . . 3-36
7.62-mm machine gun (coax) will not fire electrically . . . . . . . . . . . . . . . . . . . . . . 3-33
MAIN GUN
Excessive burned powder gas comes out of breech after firing
165-mm gun cannot be loaded - breech does not close . . . . . . . . . . . . .
165-mm gun does not return to battery or recoils slowly . . . . . . . . .
165-mm gun returns to battery (recoils) with excessive shock
MOLDBOARD
Bulldozer moldboard will not lower from lock "travel"
position . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bulldozer moldboard does not lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bulldozer blade will not dig into ground with directional
control valve lever in lower position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Moldboard fails to raise high enough to engage carrying
hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TA252936
C h a n g e 1 3-5