TM 9-2350-222-10-3
MAINTAIN TRACK (INSTALL TRACK LINK) - Continued
2. One crewmember lineup track link
pins (G).
3. Other crewmember, using hammer
(C), pound end connectors (H ax-m J)
onto pins.
4. Place wedge (K) and bolt (L) on end
connectors. Do not tighten.
5.
Check that end connectors (H
and J) are tight against track
before tightening bolts (L).
6. Tighten bolts (L) to snug only.
7.
8.
9.
Return tools to stowage.
TA132905
3-75