TM 9-2350-222-10-3
MAINTAIN TRACK (INSTALL CENTERGUIDE)
Tools:
Get from right front fender box:
q 1-5/16 inch socket with 3/4 inch
drive (A).
q 4-5/8 inch socket wrench extension
with 3/4 inch drive (B).
q T-handle socket wrench with 3/4
inch drive (C).
q Extension handle (D).
Make Sure:
q Centerguide has been removed
NOTE
If replacing track link on bro-
ken track, put crowbar under
track pads to lift track off the
ground.
1. Line up cap (E) and bolt (F)
with centerguide (G).
2. Screw nut (H) onto bolt (F).
3. Place 1-5/16 inch socket (A), 4-5/8 inch
extension (B), T-handle wrench (C),
and extension handle (D) on
centerguide nut (H).
4. Turn nut clockwise to tighten.
NOTE
If organizational mechanic is
available, have him torque nut
(H). If organizational mechanic
is not available, tighten nut
(H) tightly and have organiza-
tional mechanic torque it as
soon as possible.
5. Return tools to stowage.
TA132908
