TM 9-2350-222-10-3
MAINTAIN TRACK (INSTALL THROWN TRACK) - Continued
11. Start engine, warm up, and let idle (page 2-205).
12. Drive vehicle onto track (E) (page 2-223).
13. Stop vehicle when number six (last) roadwheel (J) is resting on
sixteenth link (K),
14. Repeat steps 5 thru 8.
NOTE
Block opposite track front and rear.
Use 30-foot piece of rope (B) to move
track onto vehicle.
15. Tie rope to center of link pin (L).
16. Pass rope (B) over centerguide groove of drive sprocket (F).
17. Pass rope around groove of rear dual support roller (M).
TA132922
3-92
