TM 9-2350-222-10-3
MAINTAIN TRACK (INSTALL THROWN TRACK) - Continued
25. Guide free end of track (E) onto drive sprocket (F).
26. Stop forward movement of vehicle when three end connectors (N) are
on drive sprocket (F).
s 27. Repeat steps 5 thru 8.
28. Remove rope from around sprocket (F) and support roller (M).
29. Pass rope (B) over and between three support rollers (M).
30. Pass rope (B) over compensating idler wheel (P). Pull and hoId rope (B)
s
tight.
31. Start engine, warm up, and let idle (page 2-205).
3-94 Change 6
