TM 9-2350-222-10-3
MAINTAIN TRACK (INSTALL THROWN TRACK) - Continued
18. Pass rope (B) under and around outer surface of drive
sprocket (F) two times.
19. Pull free end of rope (B) and hold tightly.
NOTE
Remove blocks from opposite side.
20. Start engine, warm up, and let idle (page 2-205).
21. Hold brake. Move shift lever to L (low) (page 2-215).
22, Steer slightly away from track (page 2-219).
23. Slowly release brake.
24. Hold rope (B) at free end while driver accelerates engine until drive
sprocket (F) turns slowly.
TA132923
3-93
