ARMY TM 9-2805-259-14
AIR FORCE TO 38G2-89-54
NAVY NAVFAC P-8-615-14E
4-19. Oil Filter Element (cont).
b. Replacement (Spin on Type). (figure 4-9)
(1) Using suitable oil filter wrench, remove oil filter (1).
WARNING
Drycleaning solvent PD-680 used to clean parts is potentially dangerous to person-
nel and property. Avoid repeated and prolonged skin contact. Do not use near open
flame or excessive heat. Flash point of solvent is 100F.-138F. (38C.-60C.).
(2) Clean cover (2) with drycleaning solvent, and dry thoroughly,
(3) Inspect nipple (3) and replace if threads are stripped or otherwise damaged.
(4) Lightly lubricate rubber seal on oil filter with clean engine oil (LO 9-2805-259-12).
(5) lnstall oil filter (1) tighten 3/4 turn after gasket contact is made.
4-24
Change 2