ARMY TM 9-2805-259-14
AIR FORCE TO 38G2-89-54
NAVY NAVFAC P-8-615-14E
b. Installation
This task covers:
a. Removal
INITIAL SETUP
Equipment Condition
Tools
Oil filter removed (para. 4-19).
General Mechanic's Tool Kit (Item 1, Appendix B)
Remover, Stud (NSN 5120-00-288-6578)
(Item 5, Appendix B)
Materials/Parts
Rags, Wiping (Item 7, Appendix D)
Solvent, Drycleaning (Item 8, Appendix D)
Gasket, Oil Filter Mounting (NSN 5330-00-073-3038)
(1) Remove three nuts (1) and washers (2) and remove oil filter cover (3) and gasket (4).
WARNING
Drycleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or
excessive heat. Flash point of solvent is 100F.-138F. (38C.-60C.).
(2) Clean oil filter cover (3) with drycleaning solvent, and dry thoroughly.
(3) Inspect oil filter cover (3) and replace if cracked or otherwise damaged.
(4) Inspect studs (5) and replace if damaged.
b.
(1) Ensure gasket mating surfaces are clean and free of old gasket material.
(2) Install gasket (4) and oil filter cover (3) and secure with three nuts (1) and washers (2).
