TM 9-3405-206-14 & P
No. 41032 Motor Pulley, 2
" diameter.
3
4
" bore.
lb.
1
1
2
2
No. 41-033 Motor Pulley, 2 3 4 " diameter.
" bore.
lb.
5
1
8
2
No. 41-034 Motor Pulley, 2 3 4 " diameter
bore.
lb.
3
1
4
2
No. 49-173 V-Belt 57 18 " O.C. Used with
50-891 stand.
lb.
1
2
No. 34-895 Sliding Jig For straight and
angle operations. Has 3/8 x x 18" guide
No. 41-712 Motor Pulley, 4-step, "bore,
bar and pivoting work support body with
1 lb
pointer and calibrations reading through
No. 41-713 Motor Pulley 4-step, 5/8"
120 swing. Adjustable, positive stops at
bore, 1 lb
No. 28-810 Sanding Attachment-Includes
90 and 45positions. 4 lbs.
No. 41-714 Motor Pulley 4-step, " bore,
flat and curved platens with guides and
1 lb
No. 34-568 (old 865) Clamp Attachment
mounting brackets. 1 lb.
No. 49-111 V-Belts, matched set of two,
For Sliding Jig With Clamp bar, two sliding
41" and 58 5/8" O.C. Used with 50-122 and
clamp screws, and front and rear posts. 1
50-891 stands. 1 lb.
" lbs.
No. 34-873 (old 873) Extra Clamp Screw
No. 28-883 (old 883) Guard for V-belt
and Block For Clamp Attachment. lb.
(recommended for use with 50-891 stand).
9 lbs.
WOOD CUTTING BAND SAW BLADES
No.
50-122 Enclosed Steel Stand.
For 14" Band Saws: 93 " blades are
Includes 50-139 basic stand 50-136 motor
standard: 105" blades use with 28-984
plate and 50-135 belt guard. 54 lbs.
Height Attachment. lb.
No. 28-836 Sanding Belt Garnet type,
No. 50-891 Open Steel Stand, 24" high
five, No. 80 grit, fine, " wide, 91" long. 1
with top 8x16". 26 lbs.
lb.
No. 28-837 Sanding Belt Garnet type,
five, No. 40 grit, medium, " wide, 91"
long. 1 lb.
For 20" Band Saws: All blades are 150"
No. 40-882 (old 882) Lamp Attachment
long. 2 lbs.
Uses standard 15 or 25-watt bulb (not
included).
Includes mounting bracket,
shade, socket and 115 V 8-foot cord with
plug. 1 1 2 lbs.
No. 28-843 Rip Fence-With 18" guide bars
Height Attachment Increases capacity of
and mounting screws. 13 lbs.
14" Hand Saw from 6 " to 12 " under the
No. 28-845 Rip Fence-With 32" guide bars
guide. Add at any time. Needs 105"
and mounting screws. 10 lbs.
blades.
RETRACTABLE CASTER SETS
SKIP TOOTH BAND SAW BLADES
For 14" Band Saws: For cutting aluminum,
magnesium, plastics and all kinds of wood.
All blades are 93 12 " long. 12 lb.
For 20" Band Saws: All blades are 150"
long. 2 lbs.
No. 28-894 (old 894) Height Attachment
with cast block, dowels and bolt, extension
No. 50-111 Retractable Caster Set-For
front blade guard, wood black blade guard.
50-122 enclosed steel stand. Has built-in
12 lbs.
leveling screws. 13 lbs.
4
