(2)
Adjust upper wheel tilt until the band tracks properly. The tilt and lock controls
are located on the wheel hub. To adjust wheel tilt, first loosen the lock which is
located between the tilt adjusting knob and the wheel (see drawing below). Then
turn the tilt knob until the back edge of the band just touches the saw guide back-
up inserts.
(3)
When the band is tracking correctly, tighten the tilt lock.
Adjust upper wheel tilt until band tracks correctly.
POSITIONING UPPER SAW GUIDE and POST
Post elevation is adjusted manually with the handwheel located on the side of the saw
head. Always keep the post and saw guide as close as possible to the workpiece. This
will provide maximum support for the saw band and increase accuracy. The band guard
should be locked in place at all times during sewing.
9
