TM 9-4110-255-14
4-34. CONTINUOUS DUTY SOLENOID K5 TESTING AND REPLACEMENT .
This task covers:
a. Testing
b. Removal
c. Installation
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Lock Washers (2)
Refrigeration unit shut down (para 2-7) and battery
1, Appendix G
disconnected (para 4-35).
Self Locking Nuts (2)
Control box cover door raised and latched.
4, Appendix G
Marker tags (4)
4, Appendix E
a. Testing. (See Figure 1-4.)
(1) Be sure battery has been disconnected then remove two bolts (1) and lock washers (2). Open control
panel (3). Discard lock washers.
Figure 4-28. Continuous Duty Solenoid
NOTE
Terminal hardware is supplied with continuous duty solenoid.
(2) Tag wire leads (4) and remove nuts (5), lock washers (6) and wire leads.
4-87
