TM 9-4110-255-14
4-39. ENGINE PULLEY REPLACEMENT .
This task covers:
a. Removal
b. Installation
INITIAL SETUP
General Safety Instructions:
Equipment Conditions:
WARNING
Refrigeration unit shut down (para 2-7) and battery
disconnected (para 4-35).
Exposed rotating parts are used in the
V-belts removed from engine only (para 4-38).
refrigeration unit. Personal injury can result if
refrigeration unit.
Battery is connected
a. Removal.
(1) Remove three bolts (1), and install two bolts back into threaded holes in bushing (2). Tighten bolts
evenly to separate bushing from pulley (3). Remove two bolts from bushing.
(2) Slide bushing (2) and pulley (3) off engine drive shaft (4) being careful not to lose keys (5) and (6).
Figure 4-33. Engine Pulley
4-101
