TM 9-4110-255-14
4-46. FAN CLUTCH C1 TESTING AND REPLACEMENT . - Continued
b. Removal.
(1) Remove eight bolts (3), lock washers (4), and belt access plate (5). Discard lock washers.
(2) Remove bolt (6), lock washer (7), flat washer (8), and cap (9). Discard lock washer.
(3) Loosen two set screws (10).
(4) Carefully pull condenser fan (11) off fan drive shaft (12) being careful not to damage condenser coil (13).
Leave fan in condenser shroud (14).
(5) Tag and disconnect two connectors (1).
(6) Loosen bolt (15) to relax tension on V-belt (16).
(7) Work V-belt (16) off fan clutch (2).
(8) Remove self locking nut (17) and bolt (18). Discard self locking nut.
(9) Remove nut (19), lock washer (20), flat washer (21), clutch bracket (22), flat washer (23), lock washer
(24) and nut (25). Discard lock washers.
(10) Loosen two set screws (26) and slide fan clutch (2) off fan drive shaft (12) being careful not to lose key
(27).
4-112
