TM 9-4110-255-14
4-55. STARTING MOTOR REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Marker tags (3)
Refrigeration unit shut down (para 2-7) and battery
4, Appendix E
disconnected (para 4-35).
Front door open.
Remove air cleaner (para 4-50).
a. Removal.
(1) Remove two screws (1), flat washers (2), and starting motor (3).
Figure 4-49. Starting Motor
(2) Tag and disconnect wire lead (4).
(3) Tag wire leads (5). Remove nut (6), flat washer (7), and wire leads.
NOTE
Terminal hardware is supplied with starting motor.
(4) Tag wire lead (8). Remove nut (9), lock washer (10), and wire lead.
4-130
