TM 9-4110-255-14
5-49. ENGINE AND COMPRESSOR BASE REPLACEMENT .-Continued
(4) Install two engine mount spacer plates (4), four flat washers (3), and new self locking nuts (2).
(5) Install swivel bolt (1).
NOTE
FOLLOW-ON MAINTENANCE:
Install engine (para 4-61).
Install compressor (para 5-40).
5-50. SIDE DOORS REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Rivets (24)
Refrigeration unit shut down (para 2-7) and battery
58, Appendix G
disconnected (para 4-35).
Rivets (24)
Barrel bolt clips removed (para 4-17).
59, Appendix G
a. Removal.
(1) Remove twelve rivets (1), and right side door (2).
(2) Remove twelve rivets (3), two hinges (4), and four bumpers (5).
(3) Remove twelve rivets (6), and left side door (7).
(4) Remove twelve rivets (8), two hinges (9), and four bumpers (10).
b. Installation.
(1) Install four bumpers (10), two hinges (9) and secure with twelve rivets (8).
(2) Install left side door (7) and secure using twelve rivets (6).
(3) Install four bumpers (5), two hinges (4), and secure with twelve rivets (3).
(4) Install right side door (2) and secure using twelve rivets (1).
5-102
