TM 9-4110-256-14
Table 4-1. Preventive Maintenance Checks and Services for Model F10000RE
NOTE
If the equipment must be kept in continuous operation, do only the procedures that can be done
without disturbing operation. Make complete checks and services when the equipment is shut
down.
Location
Item
Interval
Item to
Procedure
Not Fully Mission
No.
Check/Service
Capable If:
Refrigeration
Unit Exterior
1
Monthly
Doors
Service the doors by lubricating the hinges
a. Apply lubricating oil (MIL-L-2104)
sparingly from oil can onto the hinge
moving joint surfaces.
b. Wipe away excess lubricating oil with a
clean rag.
2
Monthly
Barrel Bolts
Service the barrel bolts by lubricating them
a. Apply lubricating oil (MIL-L-2104)
sparingly from oil can onto the barrel bolt
moving joint surfaces.
b. Wipe away excess lubricating oil with a
clean rag.
3
Monthly
a. Inspect as much of coil as possible, without
Condenser coil is
Coil
disassembly, for any evidence of
obstructed or evidence of
refrigerant leak. If evidence of leak is
leak is found.
found, notify direct support maintenance to
repair or replace it as necessary.
b. Inspect coil for obstructions. If coil is
obstructed with dirt or bent fins, remove
condenser coil guard (para 4-19) and clean
or straighten fins as needed.
4-12
