TM 9-4110-256-14
Table 4-1. Preventive Maintenance Checks and Services for Model F10000RE
Location
Item
Interval
Item to
Procedure
Not Fully Mission
No.
Check/Service
Capable If:
3-
(1) Clean coil if dirty.
Cont
(a) Mix a small quantity of detergent
with water to make a wash solution.
(b) Dip a scrub brush in the wash solution
and clean the fins by carefully
brushing up and down. Continue to dip
and brush as needed to loosen dirt.
(c) Rinse the scrub brush with clean water
and rinse the fins by carefully
brushing up and down. Continue to
rinse and brush as needed to clean the
coil.
(2) If fins are bent, carefully straighten
them using fin comb.
(3) Install condenser coil guard (para 4-19).
4
Monthly
a. Inspect as much of coil as possible, without
Evaporator coil is
Coil
disassembly, for any evidence of
obstructed or evidence of
refrigerant leak. If evidence of leak is
leak is found.
found, notify direct support maintenance to
repair or replace it as necessary.
b. Inspect coil for obstructions. If coil is
obstructed with dirt or bent fins, remove
evaporator coil guard (para 4-18) and clean
or straighten fins as needed.
4-13
