TM 9-4110-258-13
5.20 PRESSURE REGULATOR VALVE (CRANKCASE) REPLACEMENT. - Continued
Figure 5-15. Pressure Regulator Valve (Crankcase)
b. Installation.
(1) Install pressure regulator valve (6) and braze two fittings (5) (para 5.10).
(2) Install clamp (4), new lock washer (3), and bolt (2).
(3) Install insulation (1) and wrap with insulation tape as necessary.
NOTE
FOLLOW-ON MAINTENANCE:
Replace dehydrator (para 5.15).
Leak check (para 5.11), evacuate (para 5.12), and charge (para 5.13) the refrigeration system.
Close right side door.
5-40
