TM 9-4110-258-13
5.24 ACCUMULATOR REPLACEMENT. - Continued
Figure 5-19. Accumulator
(3) If clamp brackets (9) were removed, install two clamp brackets, four new lock washers (11), and bolts (10).
NOTE
Be sure to observe flow direction noted during removal.
(4) Install accumulator (3) and new self locking nut (8).
(5) Install two flat washers (7), bolts (6), flat washers (5), and new self locking nuts (4).
(6) Braze two fittings (2) onto accumulator (3) (para 5.10).
(7) Install insulation (1) and secure with insulation tape as necessary.
NOTE
FOLLOW-ON MAINTENANCE:
Close right side door.
5-46