TM 9-4110-258-13
5.25 SOLENOID VALVE (LIOUID LINE) REPAIR AND REPLACEMENT. - Continued
Figure 5-20. Solenoid Valve (Liquid Line)
b. Installation.
NOTE
Be sure to observe flow direction noted during removal.
(1) Install solenoid valve (9), two new lock washers (8), and bolts (7).
(2) Tighten two flare nuts (6).
(3) Install solenoid coil (5), data plate (4), lock washer (3), and screw (2).
(4) Using tags and wiring diagram (fig. 1-4), connect wire leads (1). Remove tags.
NOTE
FOLLOW-ON MAINTENANCE:
Replace dehydrator (para 5.15).
Leak check (para 5.11), evacuate (para 5.12), and charge (para 5.13) the refrigeration system.
Close left side door.
5-48
