TM 9-4120-370-14
TO 35E9-229-1
Preliminary Procedures:
Removal
a.
(2) While purging the system with nitrogen, debraze the tube joints to the condenser. (See para 5-8 and para
When handling coils, wear gloves to avoid cuts and reduce fin damage on the
coil.
(3) Using screwdriver, remove thirteen screws while supporting the condenser coil.
(4) Using gloves to protect your hands and coil fins, carefully slide the coil out of unit.
Repair
b.
(1) Repairs are limited to straightening of mashed fins
(2) If fins are mashed or dented so that air flow across coil would be blocked, straighten them using a plastic
fin comb.