TM 9-4120-371-14
For inspection and cleaning of installed coil. see paragraph 469.
Preliminary procedures: 1. Remove receiver. (See para 5-25.)
2. Remove condenser coil guard. (See para 4-27.)
a. Removal
(1)
Observe position of tubing from condenser for ease of reassembly.
(2)
When handling coils, wear gloves to avoid cuts and reduce fin damage on the coil.
(3)
Using screwdriver, remove four pan head screws from each side while supporting the condenser
coil.
(4)
Using screwdriver, remove the eight flat head screws from the front flanges of the coil.
Using gloves to protect your hands and coil fins, carefully slip the coil and brackets from unit.
(5)
