TM 9-4120-385-14
5.
Connect the sensing line with flare nut to the refrigerant tubing.
6.
Connect electrical leads.
7 . Replace motor.
8 . Replace dehydrator. Refer to Paragraph 5-22.
9.
Perform leak test. Refer to Paragraph 5-3.
10. Evacuate system. Refer to Paragraph 5-7.
11. Charge system with refrigerant. Refer to Paragraph 5-8.
12. Install top panel and secure with 11 screws and rain seal washers.
13. Install canvas cover and secure with 16 screws and rain seal washers.
5 - 2 0 . SERVICE VALVES
a . INSPECTION. See Figure 5-23.
