TM 9-4120-388-14
This task consists of:
a. Removal
b. Inspection
c. Installation
INITIAL SET-UP:
Turn off power.
a Removal.
(1) Remove four screws and flat washers.
(2) Remove cover.
b. Inspection.
(1) Be sure that cover is not bent, cracked, or punctured.
(2) Be sure that gasket is not tom, loose or missing.
(3) Be sure that information plate is readable and in place.
(4) Refer all repairs to your supervisor.
c.
Installation.
(1) Align mounting holes with casing fasteners.
(2) Secure cover to casing with four screws and flat washers.
