TM 9-4120-388-14
4-22. SIDE ACCESS PLATE COVER.
b. Inspection
This task consists of:
a. Removal
c. Installation
INITIAL SET-UP:
EquipmentCondition:
Turn off power.
a Removal.
(1) Remove four screws.
(2) Remove plate.
b. Inspection.
(1) Check that plate is not bent, cracked, or punctured. If plate is damaged, notify your supervisor.
(2) Check that gasket is not tom, loose, or missing. Refer repair/replacement to your supervisor.
Installation.
c.
(1) Align mounting holes with casing fasteners.
(2) Secure plate to casing with four screws.