TM 9-4120-388-14
4-25. CONDENSER (FAN) GUARD.
This task consists of:
a. Removal
b. Inspection
c. Installation
INITIAL SET-UP:
Equipment Condition:
Turn off power.
Disconnect input power to the air conditioner before performing any internal
maintenance. Voltages used can KILL Shutting the unit off at the control panel
does not disconnect unit power.
Removal.
a.
(1) Remove eight screws and flat washers from guard.
(2) Remove guard.
b. Inspection. Be sure that guard is not bent or broken. if damaged, notify your supervisor.
Installation.
c.
(1) Align mounting holes with casing fasteners.
(2) Using screwdriver, secure guard to casing with eight screws and flat washers.
(3) Connect power.