TM 9-4120-388-14
b. Inspection
a. Removal
This task consists of:
c. Installation
INITIAL SET-UP:
Turn off power.
Disconnect Input power to the air conditioner before performing any internal
maintenance. Voltages used can KILL. Shutting the unit off at the control panel
does not disconnect unit power.
a Removal.
(1) Loosen two captive panel fasteners and remove lower front panel.
(2) Tilt top of lower front panel out and lift panel up to remove.
b. Inspection.
(1) Be sure that panel is not bent, cracked, or punctured.
(2) Be sure that gaskets are not tom, loose, or missing.
(3) Be sure that wiring diagram plate is readable and in place.
(4) Refer all repairs to your supervisor.
Installation.
c.
(1) Set the bottom of the panel in position so that the flange is inside the lip on the cabinet base.
(2) Push the top of the panel back into position.
(3) Secure panel to casing with two captive panel fastener screws.
(4) Connect power.