TM 9-4120-388-14
4-29. CIRCUIT BREAKER ACCESS PANEL.
This task consists of:
b. Inspection
a. Removal
c. Installation
INITIAL SET-UP:
Euipment Co ndition:
Turn off power.
Disconnect input power to the air conditioner before performing any internal
maintenance. Voltages used can KILL Shutting the unit off at the control panel
does not disconnect unit power.
a Removal.
(1) Loosen two captive turnlock fastener studs.
(2) Remove access panel.
b. Inspection.
(1) Be sure that panel is not bent, cracked, or punctured.
(2) Be sure that gasket is not tom, loose, or missing.
(3) Be sure that information is readable.
(4) Refer all repairs to direct support maintenance.
Installation.
c.
(1) Align captive studs with casing fasteners.
(2) Secure access panel with two captive turnlock fastener studs.
(3) Connect power.