TM 9-4120-388-14
4-43. WIRING HARNESSES - Continued.
Inspection/Test.
a.
(1) Be sure that power has been disconnected.
(2) Check connectors for general condition and loose, broken, or missing contacts. Replace damaged connec-
tors.
(3) Check individual wires for loose solder connections, loose terminal lug connections, cut or frayed insula-
tion, and cut or broken wires.
(4) See wiring diagram (Figure 4-16) and continuity test individual wires. Repairer replace wires with no conti-
nuity.
b. Repair.
(2) See Table 4-3 (Wire List) for wire lengths and terminal/connector information.
Removal/Installation. See Figure 4-40 for removal/installation information.
c.