TM 9-4120-388-14
4-41. CONTROL PANEL HOUSING.
a. Inspection
b. Repair
This task consists of:
lNITIAL SET-UP:
Equipment Condition
Remove control panel wiring harness (4-38).
Remove TEMPerature control thermostat (4-39).
Inspection.
a.
(1) Check control panel for dents, cracks, or punctures. Replace if damage creates a hazard or interferes with
operation.
(2) Be sure that insulation, plate nut, damp, and grommets are in place and secure. Repair or replace as needed.
(3) Be sure that information plate is legible and securely riveted to control panel.
(4) Check support for cracks or dents that create a hazard or interfere with operation.
b. Repair.
(1) Repairs are limited to replacement of damaged or missing parts and tightening of mounting hardware.
(2) For replacement of information plate, notify your supervisor.
(4) Install Temperature control thermostat. (See para 4-39.)
(5) Install control panel wiring harness. (See para 4-38.)