TM9-4120-398-14
This task covers:
a. Repair
b. Replacement
INITIAL SETUP
Tools
Equipment Condition
Tool kit refrigeration SVC
Power OFF
Materials/Parts
General Safety Instructions
WARNINGS
Solvent (Item 15 Appendix E )
Adhesive (Item 1 Appendix E )
voltages used can kill. Always
Gasket (TM 9-4120-398-24P)
disconnect power cord to air conditioner
Insulation (TM9-4120-398-24P)
Cleaning cloths (Item 12 Appendix E)
before performing any internal
maintenance. Shutting unit off at its
control panel does not disconnect
unit power.
Dry cleaning solvent (Federal Specification
P-D-680) used to clean parts is potentially
dangerous to personnel and property.
Do not use near open flame or excessive heat.
Flash point of solvent is 100 F to 138 F
(38 C to 59 C).
a. Removal.
(1) Remove 12 screws (1).
(2) Remove front panel (2).
b. Repair.
(1)
Repair by straightening bends and dents. Replace if necessary.
To replace gasket or insulation
(2)
(a) Remove as much old gasket or insulation material as possibIe by pulling or scraping it away from the
metal surface.
