TM9-4120-400-14
HIGH PRESSURE SWITCH S4. - continued
5-28.
Figure 5-24. High Pressure Switch S4
REPLACEMENT
Remove supply air louver. (See para 4-14.)
1.
Remove dehydrator. (See para 5-20,)
2.
3. Tag and disconnect wire leads from high pressure switch (1).
4,
Disconnect flare nut (2) at end of capillary line from switch (1).
Remove mist eliminator bracket. (See para 5-21.)
5.
Remove two screws (3) and lock washers (4) from switch (1).
6.
Remove screw (5), lock washer (6), and clamp (7) from capillary line (8).
7.
Carefully remove capillary line (8) through grommet (9) and remove switch (1).
8.
Insert capillary line (8) through grommet (9) hole in bulkhead.
9.
10. Connect flare nut (2).
5-65
